Freefly Alta 6 Drone with MoVI Controller and M15 Gimbal

Description

A ,000 dollar deal the FreeFly ALTA 6 comes with the remote, M15 Gimbal and MoVI Controller and case. It does not include the batteries, extension legs and the additional battery tray.
The Freefly ALTA 6 multi-rotor unpacks, ready to shoot, in under five minutes. It is easy to fly, powerful, rigid, adaptable, reliable, and is a UAV optimized for up to 15-pound payloads. Confidently fly RED, ARRI and other professional cameras with our drone, guided by our state-of-the-art SYNAPSE Flight Controller.* Capture cinematic aerial shots like never before with the option to mount the MōVI on top.
ALTA 6
from
Freefly
is a hexa-rotor drone for aerial imaging that – when used in conjunction with a separately available MoVI gimbal – supports mounting the camera either below or above the airframe. This configuration flexibility makes shooting from virtually any angle possible, even with the camera pointed up. ALTA features a maximum payload of 15 lb, and is therefore suitable for DSLRs, mirrorless cameras, and even compact cinema cameras (depending on lens weight and other variables). Equipped with Freefly's own flight control system, ALTA works with a range of transmitters, including many Futaba, Spektrum, and radios (see specifications for specific requirements). Flight modes provided include Manual, Height Hold, Climb Rate Control (Vario), Position Hold, Ground Speed Control, Return-To-Home, and Auto-land. For monitoring and first-person view, the flight controller works with FPV systems from Skyzone, BOSCAM, Immersion RC, and Fatshark. OSD display is user-configurable, and telemetry can data can also be displayed on compatible Futaba transmitters.
Dimensions:
Unfolded Diameter [excluding props]: 1126 mm
Folded Diameter [excluding props]: 550 mm
Height to base of Toad In The Hole (TITH): 220 mm
Power Plant:
Number of Motors: 6
Motor Type: Direct Drive 3-Phase PMAC Outrunner
Motor Make and Model: Freefly F45
Motor Max Continuous Power Output: 350 W
Motor Max Instantaneous Peak Power Output: ,950 W
Max RPM (flat rated): 6300 RPM
Electronic Speed Controller:Freefly Silent-Drive Sine Wave ESC
Propellers:
Make and Model: Freefly ALTA Propeller
Material: Carbon fiber with balsa core
Propeller Orientation: 3 Clockwise , 3 Counter Clockwise Props
Propeller Type: 18 x 6 Folding
Flight Controller:
Model Name: Freefly SYNAPSE Flight Controller
Flight Modes: Manual
Height Hold Mode
Position Mode
Return-To-Home
Autoland
Supported Inputs:
DSMX
DSM2
S.Bus
S.Bus2
PPM
FPV SD
Supported Radios:
Futaba S.Bus & S.Bus2
DSMX, DSM2 (Spektrum/JR)
PPM, PPM Invert, PPM Graupner
Supported Radio Controller Telemetry Systems: Futaba w/ built-in voltage sense port
Minimum Radio Controller Channels Required: 5
Supported GNSS:
GPS
GLONASS
Galileo
Supported SBAS:
QZSS
WAAS
EGNOS
MSAS
First-Person View System Video Formats: NTSC PAL
Supported First-Person View Transmitters:
Skyzone
BOSCAM
ImmersionRC
Fat Shark
Supported First-Person View Cameras: Ready Made RC
First-Person View OSD Telemetry: User Configurable
Installed Transceivers: Wi-Fi
Data Logging Rate: 25 Hz
Lighting and Indicators:
Status Light:
1-Watt Red LED
1-Watt White LED
Orientation Lights:
3-Watt RGB LED
Orientation Light Color:
Red
Yellow
Blue
Green
White
MOVI CONTROLLER INCLUDED
https://freeflysystems.com/movi-controller
00 COST
M15 GIMBAL INCLUDED
00
The
MOVI M15 3-Axis Motorized Gimbal Stabilizer
from
Freefly
is a camera stabilization system that uses three motors and an IMU (inertial measurement unit) to detect and counteract unwanted movement along three axes: pan, tilt, and roll. In particular, it works to compensate for handshake or vehicle-induced vibration as well as reduce translation.
The M15 supports payloads up to 15 pounds, making it suitable for professional cinema cameras with lenses, as well as smaller camcorders and DSLRs. There is a quick-release adapter available separately so that it can be mounted on cranes, jibs, vehicles mounts, and other camera support equipment. The M15 is also Wi-Fi enabled, allowing for simple, wireless pairing with iOS, Android, and Windows apps.
The system supports single- or dual-operator control. In single user (Majestic) mode, the system's software intelligently differentiates unwanted shake or vibration from intentional movement, such as panning, while keeping the horizon level. Alternatively, you can have a dedicated operator (Stabilized Slew mode) with a remote control or RC transmitter who is in charge of camera pan, tilt--and if you want--roll. In this configuration, the camera will always point where the operator of the remote tells it to, independent of how the rig operator moves.
As with sled-style stabilizers, the camera should be balanced on the MOVI to ensure best performance. Once balanced, the MOVI pairs over Wi-Fi to an iOS, Android, or Windows app to finalize the configuration process.
PLEASE NOTE ALL FACTORY CASES ARE INCLUDED CONTACT US BEFORE BUYING TO CALCULATE CORRECT SHIPPING TO YOUR LOCATION
PLEASE NOTE N0 BATTERIES ARE INCLUDED