Kit Stator + Pickup Pulsar Coil For Suzuki RM 125 250 1994-2001

Description

Free
shipping in USA
2 year
warranty
Same day
shipping
visit our store >
find parts for :
ATV / UTV / SXS
Motorcycles
Snowmobiles
Watercraft
Other
Menu
Store Home
ATV / UTV / SXS
Motorcycles
Snowmobiles
Watercraft
Other
Kit Stator + Pickup Pulsar Coil for Suzuki RM 125 RM 250 1994-2001
KEY FEATURES
Brand new kit stator + pickup pulsar coil
Direct replacement to your original unit
The quality exceeds OEM equipment
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part
All products shipped are tested
DESCRIPTION
Brand New Kit Stator + Pickup Pulsar Coil
You must re-install your original connector and grommet (see picture)
Once your connector and grommet is re-installed, our part becomes a plug-and-play unit, direct fit, and very easy to install
Pickup pulsar coil included (separate)
Higher grade of electric components
Highest grade of copper winding, resistant to 200 degrees Celsius
All shipped products are tested
All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.
Vehicle models fitment
Suzuki RM 125 -- 1994-2001
Suzuki RM 250 -- 1996-2001
OEM part replacement
RM22843-R00
Specifications
Dimensions Stator :
Interior diameter: 28mm
Exterior diameter: 57mm
Thickness: 15mm
Length of wires stator to terminals: 600mm
Other specifications:
Number of wires: 4
Number of plugs: 0
Number of terminals: 4
Wire to wire resistance:
Source 1 : Red to White = 28 ohms +/-20%
Source 2 : Yellow to Yellow = 0.4 ohms +/- 20%
Dimensions Pickup Pulsar Coil:
Height: 25mm
Length: 22mm
Width: 18mm
Bracket center to center: 35mm
Wires length : 90mm
Other specifications:
Number of wires : 2
Number of pins: 2
Wire to wire resistance:
Pink/Red to White = 100ohms+/-20%
instructions
Before installing your new stator
Solder RED wire from RM01293 stator to original BLACK/RED
Solder WHITE wire from RM01293 stator to original WHITE/RED
The two yellow wires for the RM01293 stator are provided for late model RM's that require a power valve supply. If your bike does not have these two wires, you have two options :
A) Simply cut the wires and insulate them so they cannot short out
B) Use it for a low wattage light. To do this, you must route the two yellow wires through the stator harness
Note : When bolting stator in always use locking compound.
Pickup Pulsar Coil :
By using a small soldering iron weld the wires to the ones on your wiring harness.
Insulate your solders with heat shrink.
Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
Rotate the fly wheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010??.
If no spark or erratic spark, switch the wires at the plug.
Item Delivery
Our multiple North American locations, from which we ship our products, allows us to deliver 99.7% of our orders within the specified time period. If your item is not available in our main Colorado facility, we still guarantee that your order will be delivered within the specified time period.
If your item is not delivered within this time period, we will offer you a 5.00$ discount on your order. This guarantee applies to shipments delivered in the 48 continental USA states, excluding PO boxes.
customer service
AsK seller a question
duties & taxes
International Buyers:
Import duties, taxes, and charges are not included in the item price
or shipping cost. These charges are the buyer's responsibility.
More than 20 years of assisting mechanics around the world resolving the worst electrical problems made us know our stuff. When it comes to vehicle electrics, we definitively are the power in powersports.
Customer service
Part request
About us
About seller page
Add seller to favorite