Stator For Suzuki RM 125 1987-1988 & RM 250 1986-1993 # 32101-01B32 32101-28C03

Description

Free
shipping in USA
Same day
shipping
visit our store >
find parts for :
ATV / UTV / SXS
Motorcycles
Snowmobiles
Watercraft
Other
Menu
Store Home
find parts for
ATV / UTV / SXS
Motorcycles
Snowmobiles
Watercraft
Other
Stator for Suzuki RM125 RM250 125 250 1986-1993
Battery condition is extremely important. No stator can work correctly with a bad or weak battery.
Always fully charge your battery before performing any charging system tests or replacing parts.
If there is any doubt, have the battery load tested or replaced.
Brand new aftermarket Stator
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade of lamination materials
Highest grade of copper windings, resistant to 200 degrees Celsius.
Pick up pulsar coil included
Rubber grommet included
Back plate included
All products shipped are tested
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Vehicle models fitment
Suzuki RM 125 -- 1986-1988
Suzuki RM 250 -- 1986-1995
OEM part replacement
32101-00B30
32101-00B31
32101-01B30
32101-01B31
32101-01B32
32101-28C00
32101-28C01
32101-28C02
32101-28C03
Specifications
Dimensions :
Interior diameter : 28 mm
Exterior diameter : 58 mm
Thickness : 15 mm
Length of wires stator to grommet : 45 mm
Length of wires grommet to plug : 500 mm
Length of pickup coil's wire to grommet : 60 mm
Other specifications :
Number of wires : 4
Number of plugs: 3
Number of pins : 4
Wire to wire resistance :
Pickup : Green To Blue = 102 ohms +/-20%
Source : Black/Red To Red/White = 168 ohms +/-20%
instructions
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible but no less than 0.010??.
SHIPPING
We deliver 99.4% of our orders within the specified time period. If your item is not available in our main Colorado facility, we still guarantee that your order will be delivered within the specified time period.
If your item is not delivered within this time period, we will offer you a 5.00$ discount on your order. This guarantee applies to shipments delivered in the 48 continental USA states, excluding PO boxes.
Videos
customer service
AsK seller a question
duties & taxes
International Buyers:
Import duties, taxes, and charges are not included in the item price
or shipping cost. These charges are the buyer's responsibility.
RaceTech Electric was founded in 2011 by three motorcycle industry veterans in San Diego, CA. The group has over 20 years combined in the Motorcycle industry.
Customer service
Part request
About us
About seller page
Add seller to favorite