Stator for Yamaha YZ 65 2018 2020 | YZ 85 2002-2020 | OEM # 5PA-85560-00-00 YZ85

Description

Free
shipping in USA
2 year
warranty
Same day
shipping
visit our store >
find parts for :
ATV / UTV / SXS
Motorcycles
Snowmobiles
Watercraft
Other
Menu
Store Home
ATV / UTV / SXS
Motorcycles
Snowmobiles
Watercraft
Other
Stator for Yamaha YZ 65 2018 2020 | YZ 85 2002-2020 | Repl.# 5PA-85560-00-00 / 5PA-85560-01-00
 
Battery condition is extremely important. No stator can work correctly with a bad or weak battery.
Always fully charge your battery before performing any charging system tests or replacing parts.
If there is any doubt, have the battery load tested or replaced.
Brand new aftermarket Stator
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation
Highest grade of lamination materials
Highest grade of copper winding, resistant to 200 degrees Celsius
Pick up pulsar coil included
Connectors included
Rubber grommet included
Back Plate included
All products shipped are tested
We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause of repetitive electrical issues.
All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.
Vehicle models fitment
 
Yamaha YZ 65 -- 2018, 2020
Yamaha YZ 85 -- 2002-2020
OEM part replacement
 
5PA-85560-00-00
5PA-85560-01-00
Specifications
 
Dimensions :
Interior diameter : 28 mm
Exterior diameter : 60 mm
Thickness : 8 mm
Length of wires stator to grommet : 100 mm
Length of wires grommet to plug : 400 mm
Length of pickup coil's wire to stator : 59 mm
Other specifications :
Number of wires : 6
Number of plugs : 1
Number of pins : 6
Number of poles : 4
Wire to wire resistance :
Pickup : White/Green to White/Red = 300 ohms +-20%
Source Coil #1 : Green to Black = 60 ohms +-20%
Source Coil #2 : Black/Red to Green/White = 880 ohms +-20%
instructions
 
Before installing your new Stator
Check the AC output of the stator
Replace any burned or corroded connectors on stator and regulator rectifier
Check and repair any melted wiring
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible but no less than 0.010".
Item Delivery
 
Our multiple North American locations, from which we ship our products, allows us to deliver 99.7% of our orders within the specified time period. If your item is not available in our main Colorado facility, we still guarantee that your order will be delivered within the specified time period.
If your item is not delivered within this time period, we will offer you a 5.00$ discount on your order. This guarantee applies to shipments delivered in the 48 continental USA states, excluding PO boxes.
customer service
AsK seller a question
duties & taxes
International Buyers:
Import duties, taxes, and charges are not included in the item price
or shipping cost. These charges are the buyer's responsibility.
More than 20 years of assisting mechanics around the world resolving the worst electrical problems made us know our stuff. When it comes to vehicle electrics, we definitively are the power in powersports.
Customer service
Part request
About us
About seller page
Add seller to favorite